VIDEO – Rob Roy roar back into action with four-goal thriller against Linlithgow
This article contains affiliate links. We may earn a small commission on items purchased through this article, but that does not affect our editorial judgement.
Both sides attacked from the first whistle at Adamslie Park, with Smith testing Rabs keeper McKinven in the first minute then at the other end Team fired an angular shot narrowly past the post before Smith’s snap shot was easily taken by McKinven.
Midway through the half Coyne rattled the home crossbar with a fierce 30-yard volley.
Advertisement
Hide AdAdvertisement
Hide AdRabs grabbed the lead in the 35th minute when Sawyers set Fraser Team free on the left, before the former Knightswood Juveniles player curled a high shot into the corner of the net.
Rose had a chance to equalise minutes later, but McKinven did well to block Ovenstone’s header.
Four minutes before the break Rabs doubled their lead when Team sent over a perfect cross for Willie Sawyers to send a glancing header into the back of the net.
In the 44th minute Deas’ powerful free-kick was brilliantly pushed wide by keeper Scott.
Advertisement
Hide AdAdvertisement
Hide AdRose pulled a goal back a minute into the second half when Kennedy pulled down McLennan in the penalty box. Tommy Coyne sent the spot-kick low into the corner of the net.
Rabs came close in the 65th minute with Ferguson’s effort from close range blocked.
Linlithgow squared matters in the 70th minute when Roddy McLennan hammered home a volley from outside the penalty box.
Rabs continued to press forward. Scott spilled a Team long-range strike, but recovered before any damage was done.
Advertisement
Hide AdAdvertisement
Hide AdFerguson failed to make proper contact in front of goal and Andreoni had his shot blocked by Scott.
Up to the final whistle both sides continued to play attractive passing football and in the end a draw was a fair result.
* Have you got a story, picture or comment? E-mail [email protected]
Or you can log in below and have your say on the site...